Repair & Protection Methods for Reinforced Concrete Structures according to EN 1504

500.00

Category:
Programm:

31-10-19: 16:00-20:00 (GMT)
07-11-19: 16:00-20:00 (GMT)
14-11-19: 16:00-20:00 (GMT)
21-11-19: 16:00-20:00 (GMT)
28-11-19: 16:00-20:00 (GMT)
05-12-19: 16:00-20:00 (GMT)
10-12-19: 16:00-20:00 (GMT)
12-12-19: 16:00-20:00 (GMT)
17-12-19: 16:00-20:00 (GMT)
19-12-19: 16:00-20:00 (GMT)

Duration:

40 hours

Language:

English

Offer:

Do you represent an enterprise with more than 5 participants? Press the CORPORATE ATTENDANCE OFFERS menu button placed at the top of the page for a special offer!

Instructor:

Christos Rodopoulos

Christos Rodopoulos

Dipl-Ing, MSc, PhD, Eur-Ing, PE, MRAE
Visiting Professor Monash University, Australia – Member of the ELOT National Committee for ELOT EN 1504 and ELOT IT Revision Expert – Technical Manager Setpoint Concrete Measurements Ltd

Show Profile

Description

Description

An online CPD certified seminar (40 hours total) about the causes of concrete deterioration, the ways of how to survey a structure, quantify the work and prepare an appropriate strategy for repair according to EN 1504. Includes case studies as when the cathodic protection is the best solution or whether a coating is recommended and covers the correct preparation and use of material. CPD certifications are provided to the participants.

Limited availability – Secure your participation now! – Do you represent an enterprise with more than 5 participants? Follow the link for a special offer!
CORPORATE ATTENDANCE OFFERS

The seminar will take place exclusively online. After your order is completed you will receive an email with all the information and the link for the webinars lobby. For your participation no special equipment is needed except α microphone.

Programm

Part 1 (6 hours)

  • Understanding and acknowledging the basic phenomena related to Reinforced Concrete damage and degradation. Relate damages to specific NDT measurements
  • Understanding and acknowledging EN 1504 under the framework of repair performance indicators.
  • Relating EN 1504 to life cycle cost analysis using probabilistic and risk analysis theories

Part 2 (8 hours)

  • The mechanical and physical characteristics of bonding
  • Understanding the chemistry of coatings
  • Selecting coating against carbonation and chloride ion ingress
  • Understanding the chemistry of hydrophobic impregnators
  • Selecting hydrophobic impregnators
  • Explicit Failure modes of coating
  • Intrinsic Failure modes of coatings
  • Compatibility of substrates and coatings
  • Understanding Breathability, vapour management and vapour blockers

Part 3 (10 hours)

  • Mechanical characteristics related to patch repair – Selection of repair material
  • Preparation of substrate and its role to bond strength
  • Parameters affecting repair and bonding of cold joints
  • Bonding enhancing materials and techniques
  • Compatibility of repair grouts and slurries

Part 4 (4 hours)

  • Selecting crack injection materials
  • Analysis and design of crack injection
  • Injection of fire damage concrete
  • Methods for the approval of crack repairs

Part 5 (6 hours)

  • Design of Anchorage systems
  • Anchors for R/C and masonry
  • Failure modes of Anchorage systems
  • Expansion Anchors
  • Undercut Anchors
  • Adhesive Anchors
  • Self cutting Anchors

Part 6 (6 hours)

  • Understanding and classifying R/C corrosion
  • Re-passivation of rebar
  • Protection of R/C against chemical attack
  • Corrosion rate mitigation – Increasing electrical resistance
  • Incipient Anode effects and control
  • Cathodic protection – Analysis and Designing of systems
  • Part A – Analysis and Designing of sacrificial systems
  • Part B – Analysis and Designing of impressed current systems

Programm

Thursday 31 October 2019
16:00 – 20:00 (GMT)

Thursday 07 November 2019
16:00 – 20:00 (GMT)

Thursday 14 November 2019
16:00 – 20:00 (GMT)

Thursday 21 November 2019
16:00 – 20:00 (GMT)

Thursday 28 November 2019
16:00 – 20:00 (GMT)

Thursday 05 December 2019
16:00 – 20:00 (GMT)

Tuesday 10 December 2019
16:00 – 20:00 (GMT)

Thursday 12 December 2019
16:00 – 20:00 (GMT)

Tuesday 17 December 2019
16:00 – 20:00 (GMT)

Thursday 19 December 2019
16:00 – 20:00 (GMT)

All the sessions will be recorded and will be available in case someone will not be able to participate in a live one

 

 

Additional information

Programm:

31-10-19: 16:00-20:00 (GMT)
07-11-19: 16:00-20:00 (GMT)
14-11-19: 16:00-20:00 (GMT)
21-11-19: 16:00-20:00 (GMT)
28-11-19: 16:00-20:00 (GMT)
05-12-19: 16:00-20:00 (GMT)
10-12-19: 16:00-20:00 (GMT)
12-12-19: 16:00-20:00 (GMT)
17-12-19: 16:00-20:00 (GMT)
19-12-19: 16:00-20:00 (GMT)

Duration:

40 hours

Language:

English

Offer:

Do you represent an enterprise with more than 5 participants? Press the CORPORATE ATTENDANCE OFFERS menu button placed at the top of the page for a special offer!

Instructor:

Christos Rodopoulos

Christos Rodopoulos

Dipl-Ing, MSc, PhD, Eur-Ing, PE, MRAE
Visiting Professor Monash University, Australia – Member of the ELOT National Committee for ELOT EN 1504 and ELOT IT Revision Expert – Technical Manager Setpoint Concrete Measurements Ltd

Show Profile